These panel meters are designed especially to be super easy to set up, saving you valuable time and money. Plus, they are precise, stable, cost-effective, and available from stock. You and your staff will be delighted with the clear, high contrast display, which has adjustable brightness to suit all viewing environments.
The INT4-S is our most popular 1/8 DIN panel meter which accepts common serial ASCII data signals such as RS232, RS422 and RS485
They make perfect commercial sense, even when compared to cheaper meters, because they take so little time to set up and will continue working perfectly for years and years even in harsh industrial environments.
They can be set to display 2,3,4,5 or 6 digits and have a wide range of plug-in options to give you useful control, recording and communications functions.
They accept most industrial sensors, so you can use one familiar range of products for many applications. All are RoHS compliant.
The 1/8 DIN format INT4 is a drop-in replacement for the old INT2, but has a clearer setup system and higher performance signal processing. It looks the same, connects the same but works far better.
Weight | N/A |
---|---|
Dimensions | N/A |
Digit Height | 14mm |
Input Signal | RS232, RS422/485 |
Analogue Output | -10 to +10V, 4-20mA, 0-10V |
Alarm Outputs | 2 x SPST mechanical relays (AL2), 4 x SPST mechanical relays (AL4), 2 x solid state relays (DSS), 4 x solid state relays (QSS), 2 x mechanical relays (SPCO), 4 x SPCO mechanical relays (4SPCO) |
Data Interface | RS232, Modbus RTU, RS422/RS485 + Modbus ASCII |
Number of Digits | 6 |
Digit Colours | Green, Red, Red, Outdoor brightness |
Supply Voltage | 95-265V AC (AC), 11-30V DC (DC) |
Bezel Size | 96mm wide x 48mm high |
Panel Cutout | 92mm wide x 45mm high |
Depth Behind Panel | 125mm |
Front Panel Sealing | IP65 standard, IP67 with optional SPC4 cover |
Operating Temperature | 0C to +50 Deg. C |
A crane overload monitoring and alarm system using INT4 digital panel meters.
A crane overload monitoring and alarm system using INT4 digital panel meters.
A group of INT4 digital panel meters in a batching control panel.
An INT4-C counter mounted on a concrete batching vehicle.
As it is subjected to road spray from the wheels of the truck, it is protected by our IP67 cover. It also has daylight viewing LEDs so that it can be clearly read in sunlight.
A FUSION large digit display with 200mm high digits is summating the loads measured by 6 x INT4-L load cell panel meters.
Summation is digital with data collected over a 3-wire RS485 data link.
14 x INT4 digital panel meters DIN rail mounted inside a control cabinet for a filling line.