INT4-C

Pulse Input Ratemeter, Counter, Totaliser

The INT4-C is our most popular 1/8 DIN panel mounting meter which accepts standard pulse signals from NPN, PNP, contact closure, 24VDC and 5VDC devices and encoders.

Pulse signals from NPN, PNP, contact closure, 24VDC
6 digit display
24V @ 30mA excitation voltage
Red or green digits
Choice of output options
AC or DC powered

Function / Input Type

These panel meters are designed especially to be super easy to set up, saving you valuable time and money. Plus, they are precise, stable, cost-effective, and available from stock. You and your staff will be delighted with the clear, high contrast display, which has adjustable brightness to suit all viewing environments.

The INT4-C is our most popular 1/8 DIN panel meter which accepts standard pulse signals from NPN, PNP, contact closure, 24VDC and 5VDC devices and encoders.

Standard Features…

4 inputs for totalising
Up and Down count inputs
Gate input for controlled counting
Quadrature input for angle / position / length measurements
RPM measurement with 1 – 10000 pulses per rev
Production ratemeter mode includes rolling averaging
Wide range of input sensor types accepted

They make perfect commercial sense, even when compared to cheaper meters because they take so little time to set up and will continue working perfectly for years and years even in harsh industrial environments.

They can be set to display 2,3,4,5 or 6 digits and have a wide range of plug-in options to give you useful control, recording and communications functions.

They accept most industrial sensors, so you can use one familiar range of products for many applications. All are RoHS compliant.

The 1/8 DIN format INT4 is a drop-in replacement for the old INT2, but has a clearer setup system and higher performance signal processing. It looks the same, connects the same but works far better.

Dimensions

Weight	N/A
Dimensions	N/A
Digit Height	14mm
Input Signal	NPN, PNP, Contact Closure, 24V logic, 5V logic, Up to 50kHz
Analogue Output	-10 to +10V, 4-20mA, 0-10V
Alarm Outputs	2 x solid state relays (DSS), 4 x solid state relays (QSS), 2 x mechanical relays (SPCO), 4 x SPCO mechanical relays (4SPCO), 2 x SPST mechanical relays, 4 x SPST mechanical relays
Data Interface	RS232, Modbus RTU, RS422/RS485 + Modbus ASCII
Number of Digits	6
Supply Voltage	11-30V DC, 95-265V AC
Power Burden	10VA maximum
Bezel Size	96mm wide x 48mm high
Panel Cutout	92mm wide x 45mm high
Depth Behind Panel	125mm
Front Panel Sealing	IP65 standard, IP67 with optional SPC4 cover
Operating Temperature	0C to +50 Deg. C
Filter - Analogue Output	+/-10V, 0-10V, 4-20mA

Applications

A crane overload monitoring and alarm system using INT4 digital panel meters.

A group of INT4 digital panel meters in a batching control panel.

An INT4-C counter mounted on a concrete batching vehicle.
As it is subjected to road spray from the wheels of the truck, it is protected by our IP67 cover. It also has daylight viewing LEDs so that it can be clearly read in sunlight.

A FUSION large digit display with 200mm high digits is summating the loads measured by 6 x INT4-L load cell panel meters.
Summation is digital with data collected over a 3-wire RS485 data link.

8 x INT4 digital panel meters DIN rail mounted inside a control cabinet for a filling line.