The INT-T is a simple temperature display which shows the temperature in Degrees C or F. It accepts J, K, T, N, R, S and PT100 DIN and ANSII sensors.
| Digit Height | 14mm |
|---|---|
| Analogue Output | -10 to +10V, 4-20mA, 0-10V |
| Alarm Outputs | 4 x SPST mechanical relays (AL4) |
| Data Interface | RS232 |
| Number of Digits | 6 |
| Digit Colour | Red, Green |
| Supply Voltage | 95-265V AC (AC), 11-30V DC (DC) |
| Power Burden | 10VA maximum |
| Bezel Size | 96mm wide x 48mm high |
| Panel Cutout | 92mm wide x 45mm high |
| Depth Behind Panel | 125mm |
| Front Panel Sealing | IP65 standard, IP67 with optional SPC4 cover |
| Operating Temperature | -10 to +60 Deg. C |
Output: -10 to +10V
Drive Capacity: >1k Ohms
Accuracy: +/-20mV
Resolution: 16 bit D/A, better than 0.2mV
Output: 4-20mA
Drive Capacity: <500 Ohms
Accuracy: +/-10uA
Resolution: 16 bit D/A, better than 0.4uA
Output: 0-10V
Drive Capacity: >1k Ohms
Accuracy: +/-10mV
Resolution: 16 bit D/A, better than 0.2mV
Output: RS232 ASCII
User ManualOutput: RS422 / RS485 ASCII and Modbus ASCII
Output: RS485 Modbus RTU
A crane overload monitoring and alarm system using INT4 digital panel meters.
A crane overload monitoring and alarm system using INT4 digital panel meters.
A group of INT4 digital panel meters in a batching control panel.
An INT4-C counter mounted on a concrete batching vehicle.
As it is subjected to road spray from the wheels of the truck, it is protected by our IP67 cover. It also has daylight viewing LEDs so that it can be clearly read in sunlight.
A FUSION large digit display with 200mm high digits is summating the loads measured by 6 x INT4-L load cell panel meters.
Summation is digital with data collected over a 3-wire RS485 data link.
6 x INT4 digital panel meters DIN rail mounted inside a control cabinet for a filling line.
INT-T temperature meter manual