Product Banner

EXNR-FUSION-P

Large Digit Process Input Displays

Our EXNR-FUSION-P Large Digit Display is certified to meet the required standards for ATEX Zones 2 and 22. It is made from 316L Stainless Steel and sealed to IP66. The display lets you clearly see important information from a distance. The display accepts most industrial process signals such as 4-20mA, 0-10V, 1-5V etc. This is ideal for crane load displays, weighbridge displays, temperature, humidity, power, RPM etc.
  • ATEX Zones 2 and 22 certified
  • Blue, Green, Red, White, Yellow digits available in normal or daylight viewing brightness
  • 4 or 6 digit display
  • Fully sealed IP66 all round
  • 24V DC output to power your sensor
  • Viewing distances available from 25m up to 200m
  • AC or DC powered
  • Wall or Suspension mounting
  • Alarm output relays, analogue output and comms output options

Function / Input Type

These large digit displays are designed especially to be super easy to set up, saving you valuable time and money. Plus, they are precise, stable, and cost-effective. You and your staff will be delighted with the clear, high contrast display, which has adjustable brightness to suit all viewing environments.

Our EXNR-FUSION-P Large digit display is sealed to IP66 and certified for ATEX zones 2 and 22. It lets you clearly see important information from a distance. The display accepts most industrial process signals such as 4-20mA, 0-10V, 1-5V, etc. This is ideal for crane load displays, weighbridge displays, temperature, humidity, power, RPM, etc.

This family accepts the following signals and sensor types:

  • Any DC voltage from 0-12V
  • Any DC current from 0-25mA
  • 2, 3 or 4 wire 4-20mA humidity transmitters
  • 2, 3 or 4 wire 4-20mA pressure transmitters
  • 2, 3 or 4 wire 4-20mA load cell transmitters
  • 2, 3 or 4 wire 4-20mA temperature transmitters
  • 2, 3 or 4 wire 0-10V amplified signal transmitters
  • 3 wire position / length / angle potentiometer inputs

These can be easily scaled to read your process variable, thanks to a unique user-friendly Fusion calibration system. Displays are available to show your measurement in 4 or 6 digit format. We can also print units text on the display to show oC, Bar, %rh, mmHg, litres, gallons, tonnes etc.

What size characters do I need?

You should measure the maximum viewing distance you’ll need, and use this table to work out the ideal character size for you.

This will make sure you won’t have to struggle to read the display. And, you won’t pay too much for a display which is bigger than you need.

  • 2 inch (57mm) = legible up to 25m (75ft)
  • 4 inch (102mm) = legible up to 50m (150ft)
  • 6 inch (150mm) = legible up to 75m (240ft)
  • 8 inch (200mm) = legible up to 100m (330ft)
  • 12 inch (300mm) = legible up to 150m (490ft)
  • 16 inch (400mm) = legible up to 200m (650ft)

 

ATEX certification

II 3 D Ex tc IIIC T85°C Dc IP66, II 3 G EX nR IIC T6 Gc

Input Signal

4-20mA, 0-10V, 1-5V

Displayed Reading

Scalable

Digit Height

2 inch (57mm), 4 inch (102mm), 6 inch (150mm), 8 inch (200mm), 12 inch (300mm), 16 inch (400mm)

Number of Digits

4, 6

Digit Colours

White, Indoor brightness, White, Outdoor brightness, Blue, Indoor brightness, Blue, Outdoor brightness, Green, Indoor brightness, Green, Outdoor brightness, Red, Indoor brightness, Red, Outdoor brightness, Yellow, Indoor brightness, Yellow, Outdoor brightness

Analogue Output

-10 to +10V, 4-20mA, 0-10V

Alarm Outputs

4 x SPST mechanical relays (AL4), 2 x solid state relays (DSS), 4 x solid state relays (QSS), 2 x SPCO mechanical relays (SPCO)

Data Interface

RS232 (232), RS422/RS485 + Modbus ASCII (485), Modbus RTU

Excitation

24V DC @ 30mA

Supply Voltage

95-265V AC (AC), 11-30V DC (DC), 19-53V AC

Power Burden

40VA maximum

Mounting Options

Wall Mounting, Suspension Mounting, Panel Mounting

Sealing

IP66 all round

Case Material

316L Stainless Steel Enclosure

Operating Temperature

0C to +50 Deg. C

Unit Of Measure

White vinyl lettering (Please specify)