INT4-L

Load Cell Input Digital Panel Meter

The INT4-L is a 1/8 DIN load cell input panel meter with high precision and stability. The digital indicator utilises a modular construction technique which enable you to configure it with the exact functionality you require, this flexible approach ensures that you only pay for the features you need. Ideal for weight, torque, strain, pressure and stress measurements.

Load cell input panel meter
6 digit display
Red or green digits
Choice of output options
AC or DC powered

For the newest version, select the INT5 using the link below: INT5

This series of meters accept industrial sensors to allow various physical measurements to be made, such as weight, temperature, pressure, humidity, etc. Different models are available
for different sensor types.

The main function of this series is to give a numeric readout of the variable being monitored. Most models include an excitation power output, to power the sensor directly.

Meters are programmed using front panel pushbuttons. The buttons may be locked with a rear switch.

These meters are designed to mount into a protective enclosure which will protect users from contact with power and signal wiring. These units must be installed fully assembled and must be installed according to local electrical installation rules. When properly installed, they provide ingress protection to IP65 / NMA4X from the front

Weight	N/A
Dimensions	N/A
Digit Height	14mm
Input Signal	Load Cell, 4mV/V
Displayed Reading	Scalable
Excitation	10V DC @ 120mA
Analogue Output	-10 to +10V, 4-20mA, 0-10V
Alarm Outputs	None (0), 2 x SPST mechanical relays (AL2), 4 x SPST mechanical relays (AL4), 2 x solid state relays (DSS), 4 x solid state relays (QSS), 2 x SPCO mechanical relays (SPCO)
Data Interface	RS232, Modbus RTU, RS422/RS485 + Modbus ASCII
Number of Digits	6
Digit Colours	Green, Red, Red, Outdoor brightness
Supply Voltage	11-30V DC, 95-265V AC
Power Burden	10VA maximum
Bezel Size	96mm wide x 48mm high
Panel Cutout	92mm wide x 45mm high
Depth Behind Panel	125mm
Front Panel Sealing	IP65 standard, IP67 with optional SPC4 cover
Operating Temperature	0C to +50 Deg. C
Storage Temperature	-20C to +70 Deg.C
Filter - Alarm Outputs	2 x SPST mechanical relays

INT4-L

Load Cell Input Digital Panel Meter

Subscribe to our Newsletter