The MAXI-INT4-AH has been designed so you know how much charge (such as Ampere Hours, Ampere Minutes or Coulombs) has passed. For example, electro-plating processes normally have an ideal plating current. The amount of material deposited depends on the time this ideal current has flowed.
These digital panel meters multiply the average plating current which has flowed, by the amount of time it has flowed. This gives a readout in:
You can see the instantaneous plating current whenever you want, if you wire an external pushbutton to a pair of the meter’s terminals. You can also add useful control options, such as:
| Digit Height | 20mm |
|---|---|
| Input Signal | 50mV, 60mV, 75mV, 100mV Shunts |
| Analogue Output | 4-20mA, 0-10V |
| Alarm Outputs | None (0), 2 x SPST mechanical relays (AL2), 4 x SPST mechanical relays (AL4), 2 x solid state relays (DSS), 4 x solid state relays (QSS), 2 x SPCO mechanical relays (SPCO) |
| Data Interface | RS232, RS485, Modbus RTU |
| Number of Digits | 6 |
| Digit Colours | Green, Red |
| Supply Voltage | 95-265V AC (AC), 11-30V DC (DC) |
| Power Burden | 10VA maximum |
| Bezel Size | 144mm wide x 72mm high |
| Panel Cutout | 136mm wide x 67mm high |
| Depth Behind Panel | 150mm |
| Front Panel Sealing | IP65 with optional SPC4M cover, IP54 standard |
| Operating Temperature | 0C to +50 Deg. C |
INT4-AH Ampere Hour meter manual