The INT4-H is our most popular 1/8 DIN panel meter with Real-time clock mode and up or down timing modes with 3 x contact closure control inputs.
They make perfect commercial sense, even when compared to cheaper meters, because they take so little time to set up and will continue working perfectly for years and years even in harsh industrial environments.
They can be set to display 2,3,4,5 or 6 digits and have a wide range of plug-in options to give you useful control, recording and communications functions.
This digital panel meter is easy to use and has high precision and stability. It has a number of timing modes, which are:
You can preset a starting time to count down from, set the timer to stop when it reaches 0, or to carry on below zero showing a negative value.
This panel meter can be fitted with isolated output signal modules to add control and data sharing functions.
Weight | N/A |
---|---|
Dimensions | N/A |
Digit Height | 14mm |
Analogue Output | -10 to +10V, 4-20mA, 0-10V |
Alarm Outputs | 2 x SPST mechanical relays (AL2), 4 x SPST mechanical relays (AL4), 2 x solid state relays (DSS), 4 x solid state relays (QSS), 2 x mechanical relays (SPCO), 4 x SPCO mechanical relays (4SPCO) |
Data Interface | RS232, Modbus RTU, RS422/RS485 + Modbus ASCII |
Number of Digits | 6 |
Digit Colours | Green, Red, Red, Outdoor brightness |
Supply Voltage | 95-265V AC (AC), 11-30V DC (DC) |
Power Burden | 10VA maximum |
Bezel Size | 96mm wide x 48mm high |
Panel Cutout | 92mm wide x 45mm high |
Depth Behind Panel | 125mm |
Front Panel Sealing | IP65 standard, IP67 with optional SPC4 cover |
Operating Temperature | 0C to +50 Deg. C |
A crane overload monitoring and alarm system using INT4 digital panel meters.
A crane overload monitoring and alarm system using INT4 digital panel meters.
A group of INT4 digital panel meters in a batching control panel.
An INT4-C counter mounted on a concrete batching vehicle.
As it is subjected to road spray from the wheels of the truck, it is protected by our IP67 cover. It also has daylight viewing LEDs so that it can be clearly read in sunlight.
A FUSION large digit display with 200mm high digits is summating the loads measured by 6 x INT4-L load cell panel meters.
Summation is digital with data collected over a 3-wire RS485 data link.
9 x INT4 digital panel meters DIN rail mounted inside a control cabinet for a filling line.