Fusion Large Digital Process Signal displays - UK Made

Useful functions in our large display range...

Fusion Large displays let you clearly see important information from a distance. We make large displays which accept most industrial process signals such as 4-20mA, 0-10V, 1-5V etc. These are ideal for crane load displays, weighbridge displays, temperature, humidity, power, RPM etc.

This family accepts the following signals and sensor types:-

• Any DC voltage from 0-12V
• Any DC current from 0-25mA
• 2, 3 or 4 wire 4-20mA humidity transmitters
• 2, 3 or 4 wire 4-20mA pressure transmitters
• 2, 3 or 4 wire 4-20mA load cell transmitters
• 2, 3 or 4 wire 4-20mA temperature transmitters
• 2, 3 or 4 wire 0-10V amplified signal transmitters
• 3 wire position / length / angle potentiometer inputs

These can be easily scaled to read your process variable, thanks to a unique user-friendly Fusion calibration system. Displays are available to show your measurement in 3,4,5 or 6 digit format. We can also print units text on the display to show ^oC, Bar, %rh, mmHg, litres, gallons, tonnes etc.

For hazardous areas, we can also produce custom Atex large displays to suit your requirements. Ask us for details.

A 4 inch large digit 4-20mA crane load display during test...


The largest versions such as this 16 inch large display are ideal for use in large factories and outdoor installation

Large display Output Options

Our displays also have a wide range of useful output options:-

• 0-10V, isolated and fully scalable
• 4-20mA, isolated and fully scalable
• 2 Alarm relays
• 4 Alarm relays
• RS232
• RS485

If it's important and you want everyone to know about it, display it on a Fusion Large display...

A portable test jig by Aqualogy, including a 57mm Fusion large display during work for Welsh Water. This system is used in an innovative system to clean pipes out by forcing a plug of compressed ice slurry through the system....


Top features of these Large displays:

• Fully sealed IP65 all round
• 24V DC output to power your sensor
• Sealed IP65 as standard for outdoor or food processing use.
• Viewing distances available from 25m up to 160m
• Wall, Suspension or panel mounting
• 95-265V AC or 11-30V DC power supply
• Alarm output relays, analog output and comms output options
• Wide choice of display colours

What size characters do I need?

With London Electronics displays, you have a wide choice of character heights for different viewing distances.

You should measure the maximum viewing distance you'll need, and use this calculator to work out the ideal character size for you.

This will make sure you won't have to struggle to read the display. And, you won't pay too much for a display which is bigger than you need.

The maximum distance I need to read the display from is ... metres yards feet

Download our guide with ideas on how to improve the efficiency of your operation...

Wall mounting brackets
Click to download engineering drawing...

Suspension mounting brackets
Click to download engineering drawing...

The optional wired Remote Programmer for the Fusion series, model RPFUSION, is supplied complete with 2m of cable and circular 5 pin connector.

Displays have programming buttons on their front panels, but if a display is mounted high up, this remote programmer may be useful.

Some of our large display partners...
Applied Measurements load cell large displays
Laurel Electronics Inc large digit displays
Weschler Instruments large digital displays
Procter and Chester load cell large displays
CTH Controls large displays
ISI sa nv
Nortelco
Mantracourt large T24 displays