Made in the UK for over 27 years, Shipped Worldwide
Process Digital Panel Meters - accurate & easy to use, 3 year warranty. British made
INT4-P 4-20mA, 0-10V process digital panel meter - easy to use!
The INT4-P is our most popular 1/8 DIN panel meter which accepts standard process signals such as 4-20mA, 1-5V, 0-10V, and 3 wire potentiometer.
Precise ...
This digital panel meter is easy to use and has high precision and stability. You can set the display to have 2, 3, 4, 5 or 6 digits, depending on the type of measurement you want to make. You can also set the decimal point position.
Flexible ...
This panel meter can be fitted with isolated output signal modules to add control and data sharing functions.
Tamper Proof ...
This digital panel meter is also available with a plain front panel. All settings can be locked to prevent changes after commissioning.
The small window in the bottom right can have text such as oC, kg, Bar etc.
The display colour is available in red or green.
The INT4 release of the popular Intuitive Series of digital panel meters and controllers accept most common process signals such as 4-20mA, 0-10V, 1-5V etc.
They are British made and designed to be easy to use, reliable and precise.
They are flexible also, thanks to the wide range of plug-in options you can add, to provide control and data functions.
Dimensions...
New: Ex nR Atex Certified build options available
For hazardous areas we can offer the following explosion proof options on most models. Tell us what you need and we will be pleased to quote for Atex certified systems
Zone 1 ii 2 G Ex px iiC T6/T5/T4 Gb - Requires pressurised air system
Zone 2 ii 3 G Ex nR iiC T6/T5/T4 Gc - any product
EXD Zone 2 on request - POA
The London Electronics ATEX certified products are supplied certified for use in the condition in which they are supplied. No liability will be assumed for any loss or damages of any nature, direct or indirect, including any loss of profits or consequential damages, injury or death suffered or incurred by the buyer as a consequence of failure to install, use and/or apply the product within the scope of the installation document and certification supplied.
INT4-P Specifications
Input connections
Separate voltage and current input terminals. Isolated excitation.
Input Signal
20 bit A/D converter Current input terminal accepts:- 0-10mA, 0-20mA, 4-20mA - others to order 33 Ohm input resistance
Adjustable hysteresis In-flight compensation facility. Energise or de-energise on trip
Special features Adjustable timers to set energise and de-energise delays. Can also be set to pulse for applications needing less than 100% duty cycle. In-band and out-of-band alarm function. Manual and automatic in-flight compensation. Can be set to operate from nett or gross value.
Serial data output
Optional plug-in modules. RS232 RS485 Addressable On demand or continuous output.
Special features Can include time and date with RTC option fitted. Can be set to operate from nett or gross value.
Digits
6 digits, 14mm high. 7 metres max. viewing distance. 10 readings per second. Variable brightness from front panel.
Digit colour
Red - standard. Green - optional
Scaling
Digital menu-free system, direct or theoretical.
In addition, separate Offset and Scale variables allow you to convert the reading, without affecting calibration.
For example from oC to oF, kg to pounds etc.
Excitation
24V DC up to 60mA, to power input sensor.
Optionally 10VDC for potentiometer / slidewire.
