About Us	Contact	Clients	Projects
Easy to use, saving valuable time for busy engineers since 1992

Power meter for engine / motor testbeds

This versatile, high precision power measuring display takes two digital signals (RS485) from our INT4-L Torque and INT4-C RPM meters and computes kW, HP or BHP with extremely high precision.

It can provide serial data out to your data acquisition system and can be combined with our INT4-P Pressure and temperature displays so you can measure, display and record any important physical variable.

Ideal for internal combustion, electric, renewable and stored-energy motors.

The versatile INT4-L load cell / weighing digital panel meter

Dimensions...

INT Series Digital panel meter dimensions

INT4-HP Specifications
Input connections	Detachable screw terminals
Input Signals	RS485 from our Torque and RPM displays. Torque can be expressed in Nm or ft/lbs. Power can be displayed as kW or HP or BHP
Last digit Round-up	Selectable 1,2,5,10,20,50
Front panel controls	Calibration, Tare, Reset, Max/Min, Alarms
Power	100-240 VAC std, 11-30VDC option. 10VA Power burden, max.
Accuracy	Dependent on the accuracy of the torque measurement.
Analogue output	Optional plug-in 16 bit module Linearity +/- 0.02% of range 0-20/4-20mA into 0 to 500 Ohms Resolution 0.4uA 0-10V into loads >600 Ohms Resolution 0.2mV -10 to+10V into loads >600 Ohms Resolution 0.4mV Accuracy 0.1%of range Stability 50ppm/C Fully isolated from input and power Fully scalable with digital precision Special features Forward and reverse action possible Can be set to operate from nett or gross value.
Alarm output	Optional plug-in relay SPST modules 2 Alarms rated 2A 250VAC, SPST 4 Alarms rated 2A 250VAC, SPST Selectable normally open or normally closed Optional plug-in relay SPDT modules 2 Alarms rated 2A 250VAC, SPDT Optional plug-in solid state modules 2 Alarms rated 50V 100mA DC. Adjustable hysteresis In-flight compensation facility. Energise or de-energise on trip Special features Adjustable timers to set energise and de-energise delays. Can also be set to pulse for applications needing less than 100% duty cycle. In-band and out-of-band alarm function.
Serial data output	Optional plug-in modules. RS232 RS485 Addressable On demand or continuous output. Special features Can include time and date with RTC option fitted.
Digits	6 digits, 14mm high. 7 metres max. viewing distance. 10 readings per second. Variable brightness from front panel.
Digit colour	Red - standard. Green - optional
Logic inputs	3 logic inputs, individually configurable for Hold, Reset, Tare, Peak/valley, Nett/Gross, Memory Address Normally open, NPN or contact closure input to activate. 5V open circuit, 1mA switched current.
Environmental	Storage -20 to +70C Operating 0 to 50C Non condensing. Optional IP67 cover SPC4
Sealing	IP65 standard, IP67 with optional SPC4 cover

Top of page