Large Display timers and clocks

These large displays are ideal for applications where you need to clearly display the time, date or elepsed time of a process.

Suited for these applications and more:-

• Factory time display
• Corporate time / date display
• Days since last accident display
• Machine run-time display
• Process timing display

This page has 2 models for you to choose from:-

[C17XX Clocks] [E17XX Elapsed Timers]

[^]C17XX Series of large clock diplays
The C17XX series is a family of sealed clock / time displays which can be wall mounted, suspension mounted or panel mounted. They offer a wide range of digit sizes, brightness options, and led colours. They can also be used to create custom-made multi-line numeric displays for production monitoring and displaying general manufacturing performance. Scaling and adjustment can be done remotely.
Input connections	Remote contact closure inputs allow you to set time.
Digits	4 or 6 digits depending on model (HH:MM, HH:MM:SS, DD:MM:YY etc)
Digit colour	Red or green
Setting	Digital setting with remote programmer
Power	11-30VDC or 95-265 VAC
Accuracy	+/-0.05% of range, quartz crystal timing reference. We also offer an atomic reference for precise, automatic control of the displayed time, or date, without the need for re-setting. Use a Serial input remote display with the atomic reference, instead of the C17XX model, such as the S17XX
Analogue output	Not available on this model
Alarm output	Optional 2 alarm relays.
Connectors	Internal detachable screw terminals. Cables come out of enclosure through compression glands.
Sealing	IP65 as standard. Optional weather cowl for outdoor mounting.
Working Temperature	0 to 50 degrees C
Working humidity	5 to 100% rh. Condensing humidity OK for 57mm, 102mm and 144mm versions.
See datasheet

[^] E17XX Series of large elapsed timers
The E17XX series is a family of sealed counter / totalizer displays which can be wall mounted, suspension mounted or panel mounted. Applications include... > Days since last accident > Machine run time > Time left until maintenance > Countdown to an event. They offer a wide range of digit sizes, brightness options, and led colours. They can also be used to create custom-made multi-line numeric displays for production monitoring and displaying general manufacturing performance. Scaling and adjustment can be done remotely.
Input connections	2 channel input and 24V Excitation Suits direct connection, 2 wire active or passive loop and 3 wire sensors. Debounce filters available for contact closure inputs.
Input Signals	Input signals selected by push-on jumpers... NPN Sensors PNP Sensors Contact closures Quadrature encoders Frequency response:- from 0 to 50 000 Hz
Excitation	24V DC up to 100mA (5V, 10V and 12V optional)
Digits	4,5,6 or 7 digits depending on model
Digit colour	Red or green
Scaling	Digital scaling with remote programmer You can select from one of these timing modes... H=Hours M=Minutes S=Seconds D=Days F=Fractions of time, 0 to 9, 00 to 99 Mode 0 = MM:SS:FF Mode 2 = HH:MM:FF Mode 3 = MM:SS Mode 4 = DD:HH:MM Mode 5 = HH:MM Mode 8 = SSS.FF Mode 9 = SSSS.F Mode A = MMM.FF Mode B = MMMM.F Mode C = HHH.FF Mode D = HHHH.F Mode E = DDD.FF Mode F = DDDD.F
Filtering	Debounce filtering may be selected which limits the input pulse rate to25 per second.
Front panel controls	None, all settings done with remote wired programmer.
Power	11-30VDC or 95-265 VAC
Accuracy	+/-0.05% of range, quartz crystal timing reference
Analogue output	Not available on this model
Alarm output	Optional 2 alarm relays.
Serial data output	Optional RS485
Logic inputs	Reset to 0
Connectors	Internal detachable screw terminals. Cables come out of enclosure through compression glands.
Sealing	IP65 as standard. Optional weather cowl for outdoor mounting.
Working Temperature	0 to 50 degrees C
Working humidity	5 to 100% rh. Condensing humidity OK for 57mm, 102mm and 144mm versions.
See operating Manual
See datasheet

Example of a custom made large display using elapsed timers, counters, days since last accident, atomic clock and atomic calendar.

This display sits outside near the reception area.






And here's a time and temperature display...