Temperature & Humidity transmitters

Ideal for monitoring temperature and humidity in production environments. Choose either 2 x 4-20mA output or RS485 Modbus RTU output.



Datasheet

Key points :-

1. Wide range suits most industries
2. Analogue or serial outputs
3. Choice of filters for the sensor
4. Rugged, reliable, smart.




The LEL18 transducer is for the continuous measurement and conversion of relative humidity and ambient temperature into a digital or analogue voltage or current standard signal. The transducer may be programmmed and calibrated through the RS-485 interface.

Sensor shields allow the transducer to operate in various ambient conditions, dusty, dry, corrosive etc.. The transducer is designed to be mounted on a wall.

The LEL18 transducer performs following functions:

• calculation of selected physical quantities, (dew-point temperature, absolute humidity)
• conversion of measured quantities into a linear output signal
• memory of maximum and minimum values for each value
• programming of the measurement averaging time
• servicing of RS-485 interface in MODBUS RTU mode.

Technical Data
Basic parameters:
- relative humidity measurement (RH) 0...100% without condensation
- basic error +/- 2% for rh 10...90% +/- 3% for remaining range
- hysteresis for humidity measurement +/- 1%
- temperature measurement range (T) - 30...85oC
- temperature conversion accuracy +/- 0.5% of the range
- calculates abs. humidity (a) [g/m3] dew-point temp. (Td) [oC]
- additional errors: temp. effect +/- 25% of basic error/10oC