panel meter and large display manufacturer
  • Multi channel display, with data logging and network connection
  • 1/8 DIN digital panel meters for measuring and controlling most physical variables
  • Loop powered 1/8 DIN digital panel meters
  • Analogue AC and DC panel meters
  • Miniature programmable digital panel meters for AC and DC measurements
  • Fully sealed industrial large digit displays
  • Industrial clocks with automatic summer and winter correction, synchronisation to atomic standards
  • Custom made large displays, in this case an outdoor temperature display for a holiday resort
  • Custom made event count down displays
  • Combined temperature and humidity displays for industrial environmental monitoring
  • Customised large bargraphs built to suit your specifications
  • Multi-colour panel mounting programmable bargraphs
  • 1/8 DIN bargraph
  • Large format sealed bargraph
  • Multi-colour miniature panel mounting programmable bargraphs
  • Custom made message displays for production line monitoring
  • Custom made and standard message displays for production line monitoring
  • Custom made and standard message displays for production line monitoring
  • Custom made and standard message displays for production line monitoring
  • Custom made and standard message displays for production line monitoring
  • Triple 4-20mA loop splitter
  • Portable carrying case for laboratory or general test use. 1 to 12 panel meter capacity
  • Network enabled power monitor and data logger
  • Generator synchro display and controller
  • IP67 splash proof cover for 1/8 DIN panel meters
Panel Meters Large Displays Bargraphs Message Displays Others
Thorncote Road, Near Sandy, Bedfordshire SG19 1PU Tel +44(0)1767 626444 sales@london-electronics.com
 
Contact our UK Head office
Contact our Belgian distributor
Contact our Danish distributor
Contact our Finnish distributor
Contact our French distributor
Contact our Dutch distributor
Contact our Norwegian distributor
Contact our Swedish distributor

RoHS & WEEE at London Electronics

rohs and weee

The Restriction of Hazardous Substances (RoHS) is a European Union directive which bans some chemicals from being used in some types of electrical and electronic equipment after July 2006.

The aim is to cut health risks and damage to the environment caused by toxic materials including lead, cadmium, mercury, polybrominated biphenyls (PBB's), polybrominated diphenyl ethers (PBDE's), and hexavalent chromium (Cr (VI)).

We make products which are classified under Category 9 as "Monitoring and Control Instruments". See Annex IA of the WEEE directive.

This means they are currently exempt from the requirements of RoHS.

Because we realise that our equipment could be used as a component within a system which must fulfil the RoHS rules, we now only source components which are themselves certified RoHS compliant.

We have a strictly controlled, formal system to ensure that we comply with the requirements of European directive 2002/95/CE

Please note that some of our older products may not be RoHS compliant, as they may still have older components in them. However, in most cases, we have an RoHS compliant alternative to offer you - See the alternative cross-reference selector below.

We can issue certificates of compliance for all newer products on request.

Cross Reference chart:-

Old ModelNew Model
ACI-3 / ACI-4 INT-ACI*
ACI-J INT-ACI*
ACV-3 / ACV-4 INT-ACV*
ACV-J INT-ACV*
DCI-3 / DCI-4 INT-P / INT-DCI*
DCI-J IL-P / INT-DCI*
DCV-3 / DCV-4 INT-P / INT-DCV*
DCV-J IL-P / INT-DCV*
LOAD-3 / LOAD-4 IL-L / IJ-L / INT-L
Mini-CountINT-C
Mini-RateINT-F
PRO-3 / PRO-4 IL-P / IJ-P / INT-P
PRO-J IL-P
SER-06INT-S
RTD3 /RTD4INT-T
TC3 / TC4INT-T
* = New product in developement

rohs and weee

The WEEE Directive is intended to raise the level of recycling of electrical and electronic equipment It encourages manufacturers to design products with recycling in mind, to reduce the amount of waste materials in the environment.

All electrical and electronic equipment (EEE) placed on the European market after 13 August 2005 is subject to the requirements of the WEEE directive.

In Europe, this equipment must be disposed of in accordance with European Parliamentary Directive 2002/96/EC.

This means it must be sent to an approved recycling plant if you want to dispose of it.

It must not be thrown away in general rubbish.

If you are unable to dispose of this item locally, you may send it to us for recycling.

Conditions:

  • We will only accept items made by us.
  • You must pay for transport of the goods to us.
  • We will only accept items if they include a signed declaration by an authorised person in your organisation, stating that :-
  1. The item is safe to handle and has no contaminants which may be harmful to people or the environment.
  2. You wish us to dispose of or destroy the item(s)

This is now Week 5 of 2012

 
london-electronics.com


Home |  Digital panel meters | Large displays | Transmitters | Bargraphs | Message displays |

© 1993 to 2012 Tel +44(0)1767 626444 london-electronics.com Company Registration 2722503
London Electronics Ltd, Thorncote Road, Near Sandy, SG19 1PU, England