Loadcell input Large Displays
These large displays accept standard 4 wire loadcells. They can easily be scaled to read in your preferred engineering units.
Because the scaling is digital, stability and accuracy is excellent.
The displays have a 5V excitation output voltage which you can use to power the loadcell bridge.
You have a range of digit sizes to choose from, to suit the viewing distance you need.
This page has 1 model for you to choose from:-
[L175X]
The L175X series is a family of sealed load/weight displays which can be wall mounted, suspension mounted or panel mounted.
They offer a wide range of digit sizes, brightness options, and led colours.
They can also be used to create custom-made multi-line numeric displays for production monitoring and displaying general manufacturing performance.
Scaling and adjustment can be done remotely.


|
| Input connections | MilliVolt input, Excitation
Suits direct connection, 4 wire loadcells, 350 Ohm |
| Input Signals | mV signal from loadcells with sensitivity from 1.5mV/V to 3mV/V
10 Megohm input reistance. |
| Excitation | 5V DC up to 60mA |
| Digits | 5 digits, in a range of digit sizes: 57, 102, 144, 200, 280mm high |
| Digit colour | Red or green |
| Scaling | Digital scaling with remote programmer
 |
| Filtering | Adjustable 0 to 5 Seconds |
| Last digit Round-up | Selectable 1,2,5,10,20,50 |
| User linearisation | Not available on this model |
| Front panel controls | None, all settings done with remote wired programmer. |
| Power | 11-30VDC or 95-265 VAC |
| Accuracy | +/-0.05% of range |
| Thermal stability - range | +/- 100ppm/oC |
| Thermal stability - offset | +/- 100ppm/oC |
| Analogue output | Not available on this model |
| Alarm output | Optional 2 alarm relays. Rated 250VAC, 2A Resistive. May be set as HI or LO. You can select normally open or normally closed contacts. |
| Serial data output | Optional RS485 |
| Logic inputs | TARE + TARE Reset + Gross/Nett |
| Connectors | Internal detachable screw terminals. Cables come out of enclosure through compression glands. |
| Sealing | IP65 as standard. Optional weather cowl for outdoor mounting. |
| Working Temperature | 0 to 50 degrees C |
| Working humidity | 5 to 100% rh. Condensing humidity OK for 57mm, 102mm and 144mm versions. |
| See operating Manual |
| See datasheet |
Didn't find exacly what you wanted? Try looking here for ideas.
We'd be please to build EXACTLY what you want, so you don't have to compromise.
|
london-electronics.com

|