Ethernet to RS232 / RS485 gateway converter
Most buildings have network cabling already installed. You can connect your computer to various serial data devices through your network, with this simple converter.
Large displays, message displays and any other measurement and display devices are ideal candidates for networking.
You can even connect from your PC to a display in another building, another town or another country. This converter uses internet protocol message packeting (IP), which allows it to be used across borders without boundaries.
Screw terminals make installation easy, the configuration procedure is simple and fast.
See manual
See datasheet
Download software
XP drivers
X32 drivers (32 bit XP/Vista/Windows7)
X64 drivers (64 bit XP/Vista/Windows7)
London Electronics default settings
Module firmware
Example of a connection to one of our message displays.
| Specifications: | |
| Case width | 137.0 mm max |
| Case forward projection | 30.0mm |
| Case height | 62.0 mm case only, 98.0mm including connectors |
| Typical weight | 135 grams |
| Operating conditions | 0 to 50 degrees C |
| Storage conditions | -20 to +70 degrees C |
| Case sealing | IP40 |
| Case Material | Polycarbonate |
| Cable dimensions | Accepts cables up to 1.5mm
diameter |
| Flammability Class | V0 (UL94) |
| Power supply | 12 to 30V DC, 2 watts max. |
| Isolation | Ethernet isolated from power and
RS232/RS485. RS232 and RS485
ports not isolated from power. |
| Ethernet Connection | Standard base 10/100 RJ45 |
| Serial Data ports |
RS232 or RS485, switch selectable.
Baud rate set with PC based
configuration software. |
|
|
This is now Week 5 of 2012
|
|
Fusion C Counters
