Bridge input digital panel meters

The digital panelmeters and controllers on this page accept standard 4 and 6 wire bridge type loadcells directly.

Suited for these applications:-

• Force measurement
• Torque measurement
• Load measurement
• Weight measurement
• Strain measurement
• Pressure measurement (with bridge sensors. Ask for 100mV range meters)

This page has 4 models for you to choose from:-

[IL-L] [IJ-L] [INT-L] [MAXI-INT-L]

[^] Model IL-L
The IL-L is a low cost yet highly flexible and easy to use 1/8 DIN digital panel load meter for display-only applications.
Loadcell connection	4 wire only
Input Signal	0.5 to 3.5mV/V
Excitation	10V DC up to 120mA
Digits	5 digits, 14mm high. Legible up to 7 metres away.
Digit colour	Red or green
Scaling	Digital menu-free system
Filtering	Adjustable 0 to 5 Seconds
Last digit Round-up	Selectable 1,2,5,10,20,50
User linearisation	Not available on this model
Front panel controls	Calibration, Tare, Reset, Max/Min
Power	11-30VDC or 95-265 VAC 4 Watts
Accuracy	+/-0.1% of range +/- 2 counts
Thermal stability - range	+/- 100ppm/oC
Thermal stability - offset	+/- 50ppm/oC
Analogue output	Not available on this model
Alarm output	Not available on this model
Serial data output	Not available on this model
Logic inputs	TARE + TARE Reset
Connectors	Detachable screw terminals
Bezel size	96mm wide x 48mm high. 13mm forward.
Panel cutout	92mm wide x 45mm high. +1mm, -0mm
Depth behind panel	125mm including connectors + cable.
Sealing	IP54 standard, IP67 with optional SPC4 cover
See operating Manual

[^] Model IJ-L
The IJ-L digital panel meter is a low cost yet highly flexible and easy to use 1/8 DIN load display. It includes 2 precision alarm relays as standard, which may be set anywhere in the working range of the loadcell, as High or Low acting. Each alarm can have its own hysteresis setting to minimise relay chatter.
Loadcell connection	4 wire only
Input Signal	0.5 to 3.5mV/V
Excitation	10V DC up to 120mA
Digits	5 digits, 14mm high. Legible up to 7 metres away
Digit colour	Red or green
Scaling	Digital menu-free system
Filtering	Adjustable 0 to 5 Seconds
Last digit Round-up	Selectable 1,2,5,10,20,50
User linearisation	Not available on this model
Front panel controls	Calibration, Tare, Reset, Max/Min, Alarms
Power	11-30VDC or 95-265 VAC 4 Watts
Accuracy	+/-0.1% of range +/- 2 counts.
Thermal stability - range	+/- 100ppm/oC
Thermal stability - offset	+/- 50ppm/oC
Analogue output	Not available on this model
Alarm output	2 Alarms rated 5A 250VAC SPDT
Serial data output	Not available on this model
Logic inputs	TARE + TARE Reset
Connectors	Detachable screw terminals
Bezel size	96mm wide x 48mm high. 13mm forward.
Panel cutout	92mm wide x 45mm high. +1mm, -0mm
Depth behind panel	125mm including connectors + cable.
Sealing	IP54 standard, IP67 with optional SPC4 cover
See operating Manual

[^] Model INT-L
The INT-L panel meter is a low cost yet highly flexible and easy to use 1/8 DIN load display. It has a number of useful plug-in options which make it ideal for use in many control and monitoring applications. It also has a 10 point linearising function, which lets you correct for non-linearities in the sensor.
Loadcell connection	4 wire and 6 wire
Input Signal	0.5 to 3.5mV/V
Excitation	10V DC up to 120mA
Digits	5 digits, 14mm high. Legible up to 7 metres away
Digit colour	Red or green
Scaling	Digital menu-free system
Filtering	Adjustable 0 to 5 Seconds
Last digit Round-up	Selectable 1,2,5,10,20,50
User linearisation	Up to10 points
Front panel controls	Calibration, Tare, Reset, Max/Min, Alarms
Power	11-30VDC or 95-265 VAC 8 Watts max.
Accuracy	+/-0.05% of range
Thermal stability - range	+/- 50ppm/oC
Thermal stability - offset	+/- 20ppm/oC
Analogue output	Optional plug-in module 4-20mA into 0 to 500 Ohms 0-10V into loads >600 Ohms -5 to+5V into loads >600 Ohms Fully isolated from input and power Fully scalable with digital precision Forward and reversion action possible
Alarm output	Optional plug-in modules 2 Alarms rated 5A 250VAC, SPST 4 Alarms rated 5A 250VAC, SPST Adjustable hysteresis In-flight compensation facility. Energise or de-energise on trip Normally open or closed
Serial data output	Optional plug-in modules. RS232 1200 baud output only. RS422 1200 baud output only. RS485 Addressable DeviceNet Addressable Modbus Addressable Profibus DP Addressable
Logic inputs	TARE, Peak/Valley and RESET
Connectors	Detachable screw terminals
Bezel size	96mm wide x 48mm high. 13mm forward.
Panel cutout	92mm wide x 45mm high. +1mm, -0mm
Depth behind panel	125mm including connectors + cable.
Sealing	IP65 standard, IP67 with optional SPC4 cover
See operating Manual
See operating Manual for NEW model due Jan 08
See datasheet

[^] Model MAXI-INT-L
The MAXI-INT-L is a larger format version of the INT-L digital meter. This gives improved visibility and larger buttons. It has a number of useful plug-in options which make it ideal for use in many control and monitoring applications. It also has a 10 point linearising function, which lets you correct for non-linearities in the sensor.
Loadcell connection	4 wire and 6 wire
Input Signal	0.5 to 3.5mV/V
Excitation	10V DC up to 120mA
Digits	5 digits, 20mm high. Legible up to 10 metres away
Digit colour	Red or green
Scaling	Digital menu-free system
Filtering	Adjustable 0 to 5 Seconds
Last digit Round-up	Selectable 1,2,5,10,20,50
User linearisation	Up to10 points
Front panel controls	Calibration, Tare, Reset, Max/Min, Alarms
Power	11-30VDC or 95-265 VAC 8 Watts max.
Accuracy	+/-0.05% of range
Thermal stability - range	+/- 50ppm/oC
Thermal stability - offset	+/- 20ppm/oC
Analogue output	Optional plug-in module 4-20mA into 0 to 500 Ohms 0-10V into loads >600 Ohms -5 to+5V into loads >600 Ohms Fully isolated from input and power Fully scalable with digital precision Forward and reversion action possible
Alarm output	Optional plug-in modules 2 Alarms rated 5A 250VAC, SPST 4 Alarms rated 5A 250VAC, SPST Adjustable hysteresis In-flight compensation facility. Energise or de-energise on trip Normally open or closed
Serial data output	Optional plug-in modules. RS232 1200 baud output only. RS422 1200 baud output only. RS485 Addressable DeviceNet Addressable Modbus Addressable Profibus DP Addressable
Logic inputs	TARE, Peak/Valley and RESET
Connectors	Detachable screw terminals
Bezel size	144mm wide x 72mm high. 13mm forward.
Panel cutout	138mm wide x 73mm high. +1mm, -0mm
Depth behind panel	150mm including connectors + cable.
Sealing	IP54 standard, IP65 with optional SPC4-M cover
See operating Manual
See datasheet