The digital panel meters and controllers on this page accept AC voltages. All can be scaled to read in your preferred engineering units.
Suited to these applications and more:-
|
The ACV-J is an economical, easy to use 1/8 DIN screwdriver scalable (Zero & Span pots) AC digital panel Voltmeter for display-only applications.
|
| Input ranges | Jumper switch selectable:-
0-199.9 mV
0-1.999 V
0-19.99 V
0-199.9 V
0-500 V
|
| Digits | 3 1/2 digits [?], 14mm high. Legible up to 7 metres away. |
| Digit colour | Red or green (variable brightness option available) |
| Scaling | Zero and Span potentiometers |
| Filtering | Fixed 0.5 Second basic filtering. 1.0 Seconds on True RMS version |
| Front panel controls | Zero and Span potentiometers. Decimal point position jumper switch. |
| Power options | 11-30VDC, 24VAC, 48VAC, 110VAC or 240VAC. 4 watts max. |
| Accuracy | +/-0.25% of range +/-1 count for inputs over 1% of range |
| Thermal stability - range | +/- 100ppm/oC |
| Thermal stability - offset | +/- 50ppm/oC |
| RMS Option | Crest factors less than 3 |
| Frequency range | 40-5000 Hz |
| Connectors | Detachable screw terminals |
| Bezel size | 96mm wide x 48mm high. 13mm forward. |
| Panel cutout | 92mm wide x 45mm high. +1mm, -0mm |
| Depth behind panel | 93mm including connectors + cable. |
| Sealing | IP54 standard, IP67 with optional SPC4 cover |
| See operating Manual |
|
The ACV3 and ACV4 are low cost yet highly flexible and easy to use 1/8 DIN scalable digital panel AC voltmeters.
They have a number of useful plug-in options which make them ideal for use in many control and monitoring applications.
|
| Input Signals |
ACV3 Jumper switch range selections:
0-199.9 mV
0-1.999 V
0-19.99 V
0-199.9 V
0-500 V
ACV4 Jumper switch range selections:
0-199.99 mV
0-1.9999 V
0-19.999 V
0-199.99 V
0-500.0 V
|
| Excitation | None on this model |
| Digits | 3 1/2 digits [?] on ACV3, 4 1/2 digits [?] on ACV4, 14mm high. Legible up to 7 metres away
Optional 4 digits, 20mm high. Legible to 10 metres |
| Digit colour | Red or green |
| Scaling | Zero and Span potentiometers. |
| Filtering | Fixed 0.5 second time response |
| Front panel controls | Zero and Span, trip alarm adjustments. |
| Power | 11-30VDC or 95-265 VAC |
| Accuracy | +/-0.25% of range +/-1 count for inputs over 1% of range |
| Thermal stability - range | +/- 50ppm/oC |
| Thermal stability - offset | +/- 20ppm/oC |
| RMS Option | Crest factors less than 3 |
| Frequency range | 40-5000 Hz |
| Analogue output | Optional plug-in module
4-20mA into 0 to 500 Ohms
0-10V into loads >600 Ohms
Not isolated from input , so only use if you have a voltage transformer to give input isolation.
Fully scalable with zero and span potentiometers. Can be combined with alarm outputs. |
| Alarm output | Optional plug-in module
2 Alarms rated 5A 250VAC, SPDT
De-energise on trip. Can be combined with analogue output. |
| Serial data output | Optional plug-in module for RS232. Not available if alarms or analogue output option are fitted. |
| Logic inputs | not on this model |
| Connectors | Detachable screw terminals |
| Bezel size | 96mm wide x 48mm high. 13mm forward. |
| Panel cutout | 92mm wide x 45mm high. +1mm, -0mm |
| Depth behind panel | 125mm including connectors + cable. |
| Sealing | IP54 standard, IP67 with optional SPC4 cover |
| See operating Manual |
|
The PICA-E is a low cost yet highly flexible and easy to use miniature 1/16 DIN scalable AC and DC Current and Voltage meter for display-only applications.
|
| Input connections | Current input, Voltage input
|
| Input Signals | Current input terminal accepts:-
1A and 5A ranges
14 milliOhm input resistance
Voltage input terminals accepts:-
0-100V, 0-600V
3 Megohm input resistance. |
| Excitation | Not available on this model |
| Digits | 4 digits, 10mm high. Legible up to 5 metres away. |
| Digit colour | Red |
| Scaling | Digital 3 button programming system |
| Filtering | Not available on this model |
| Last digit Round-up | Not available on this model |
| User linearisation | Not available on this model |
| Front panel controls | 3 programming buttons |
| Power | 11-70VDC & 21-53VAC or 100-300VDC & 85-265 VAC |
| Accuracy | +/-0.4% of reading +/-3 digits |
| Thermal stability - range | +/- 100ppm/oC |
| Thermal stability - offset | +/- 100ppm/oC |
| Analogue output | Not available on this model |
| Alarm output | Not available on this model |
| Serial data output | Not available on this model |
| Logic inputs | Not available on this model |
| Connectors | Detachable screw terminals |
| Bezel size | 48mm wide x 24mm high. 13mm forward. |
| Panel cutout | 45mm wide x 22mm high. +1mm, -0mm |
| Depth behind panel | 70mm including connectors + cable. |
| Sealing | IP65 |
| See datasheet |
| See manual |
